Wargaming featured prominently in US efforts during the 1990-91 war in the Persian Gulf. On the morning of August 2nd, with Iraq's conquest of Kuwait still not complete, the Pentagon looked around for some quick wargaming on what was going on and what it all meant. The only kind of wargame that could get results quickly was a manual game, a commercial manual game that could be bought in a game store. The game used was Gulf Strike. Mark Herman had designed this game on potential wars in the Persian Gulf during the mid 1980s. The game had already been updated once a few years later and was still in print. Mark had, for several years, been working for one defense consulting firm or another, so the Pentagon knew who he was and what he could do. The Pentagon approached Mark at 10 AM on August 2nd, he was under contract at 2 PM and the game began at 3 PM (using various Pentagon Middle East experts as players). Before the day, Iraq had conquered Kuwait, but the wargamers in Washington knew Iraq was doomed. The results of this manual game were the basis of most of the decision making during August. Ironically, when Mark went to update Gulf Strike for commercial release, he had to borrow the Order of Battle (and other) information from the Arabian Nightmares game Austin Bay and I were working on for late 1990 publication. Mark had used classified information for the August 2nd Gulf Strike game, so he had to get a new set of clearly unclassified information for a commercial version of the Gulf Strike update. Since Mark was another member of the old SPI gang, we had no problem giving him permission to use all he wanted from Arabian Nightmares. Many of the numerous SPI "school of wargame design" graduates were prominant as analysts on TV during the war. One wargamer quipped that, "every time I turned on the TV news, it looked like an SPI reunion." For many years, SPI was the primier place to learn how to design wargames, particulary games on contemporary subjects. After leaving SPI, many of these designers went to work for the military or intelligence agencies.
Naturally, most of the officers and many of the troops in Desert Storm had used the dozens of different wargames developed during the 1980s. Before Iraq invaded Kuwait, wargames were used to determine what kind of force would go to the Gulf if there were a war. There had been contingency planning for a Persian Gulf war since the early 1970s and the planning had gotten even more intensive after Iraq invaded Iran in 1980. This pre-August 1990 wargaming did not deal so much with the nature of the future combat as with all the behind the scenes issues that had to be settled first. Among those issues were calculations on the size of the logistical effort required to get the troops there and sustain them. The composition of the forces sent had to be worked out, as well as plans for the use of air power. Professional wargaming gets involved with a lot of dreary details that commercial wargames do not treat in detail. However, in war victory goes to the side that is best able to cope with the details.
The operations of the combat units on the battlefield were gamed out using games similar to those available commercially. As the Persian Gulf was a desert zone it was expected that the fighting would make extensive use of mechanized forces. This was the war the US Army had been preparing to fight in central Europe against Russian armies since the 1950s. It was always assumed that the same tactics and weapons would do in the Gulf. One thing the combat wargaming also had to do was calculate expected casualties. This was a touchy subject, always had been. It's also something of a unexamined area in the Pentagon. In 1988 I was invited down to the Department of Defense Medical School to give a series of lectures. One of them was for the faculty, and some officers from the Pentagon, on calculating losses in combat. In the course of my talk, I turned to the Pentagon group (whose specialty was calculating losses in future wars), and asked how they did it. The reply was, "that's why we came over here." They weren't kidding. Nothing much had changed by 1990. When the CENTCOM wargaming group was asked to come up with some casualty figures for a briefing back in Washington, they basically referred to average losses per day of combat for battles going back to World War II. They didn't need a computer or wargame for that. But when they were asked how many Iraqis would have to be killed or wounded before an August, 1990 advance into Saudi Arabia would be stopped, they came up with "50%." I had an opportunity to ask some of the key people involved where that number came from and was told, "the TACWAR game." TACWAR is one of the many computerized wargames currently used by the US Army. So I turned to one of the folks (no names, to protect the innocent) responsible for building TACWAR and asked how the "50%" figure was calculated. After being led around the mulberry bush a few times I discovered that "someone had picked up some numbers somewhere" and it was these attrition and "unit ineffectiveness" formulae from "somewhere" that created the yardstick of "destroying 50% of Iraqi forces to render them ineffective." This 50% figure was used repeatedly. Now you know where it came from. From somewhere. At least it worked.
The wargame operation assigned to CENTCOM (the Central Command headquarters controlling all coalition forces in the Gulf) was small. Normally, CENTCOM is located at MacDill air force base (outside Tampa, Florida). CENTCOM is the American military fire brigade for any emergency situations in the Persian Gulf area. There are similar headquarters for all major US area commands (one for Europe, one for the Pacific, etc.). The CENTCOM wargame operation had about two dozen people, half military and half civilian (usually consultants, and mostly programmers). They had lots of hardware, a VAX 8650 and a VAX 4000 minicomputers. Also two Sun network servers connected to 22 Sun workstations (industrial strength PCs). Numerous PCs were available in Saudi Arabia. They had three wargames available:
TACWAR was the game used the most because it was able to deal with the most detail (logistics, in particular). Game turns were one or more days, after which the user changed decisions and objectives and ran the next day or more than one day. Each day of simulated operations took one to three minutes of real time.
You could run a large number of days all at once, getting the time per day down to less than a minute. Speed of execution, of course, depended on the speed of the computer you ran it on. Normally, it runs on a VAX minicomputer, although in theory, any minicomputer or 32 bit PC running Unix (a computer operating system) could handle the game.
When the war began, part of the CENTCOM wargame operation was in one of the first cargo aircraft heading to Saudi Arabia. The part that went to the Gulf had nine troops, the VAX 4000 (a bit larger than a PC and more powerful than the older VAX 8650), one of the Sun network servers and seven of the Sun workstations. While TACWAR did a lot of the numbers crunching to calculate things like logistic needs and the movement of major units into the area, the workstations were used for spreadsheet modeling, report writing and preparing graphics for briefings. TACWAR, running on the VAX, took 15-20 minutes for each simulation of 30 days of operations. In most respects, TACWAR was a traditional military wargame. That is, you put in your assumptions about who could do what to whom and with what and TACWAR would perform a lot of calculations. TACWAR did not allow for players, as such. The user loaded in what he thought each side had and what they would do. The "artificial intelligence" routines that caused each side to make this or that decision during combat were not as sophisticated as those found in commercial wargames. But TACWAR was able to do a credable job nevertheless. Sort of like a commercial computer wargame where you let the computer play each side and just wait for the results. In the case of TACWAR, the results are in the form of detailed reports and pay a lot more attention to logistics and support. TACWAR could deal with air, ground, logistics and chemical warfare operations as well as new units arriving during the period covered by the game. TACWAR did not have any fancy output (although that is in the works). You got page after page of numbers and cryptic terms. The Freelance, PC based, graphics package was used to pretty the TACWAR results up before passing them on to CENTCOM staff and commanders.
Manual and spreadsheet modeling were used to do a lot of the logistics work and sorting out how best to use the air power. In other words, a lot of the wargaming was done with tools available to, and familiar to, civilian wargamers. Civilian wargamers are generally shielded from most of the logistic and support details that are needed to make an armed force functional, but the military must pay close attention to these items. It was the computerized logistical exercises that made it possible to launch the ground attack around the Iraqi flank. Considering the millions of tons of supplies (and each item getting to the right place at the right time), over 100,000 vehicles and half a million troops involved, you can see how only a computerized wargame could handle such a load. TACWAR simulations indicated the best places for supply dumps, how much tonnage could be sent up which roads (or cross country) and if enough supply could be moved in time to support certain types of operations. A lot of credit for the apparent smoothness of Desert Storm has to go to the CENTCOM wargamers.
I don't know how many of the CENTCOM crew went through one of my lectures, but they certainly were using every tool in my toolbox. Order of battle data was kept in a commercial database program and dumped into JTLS and spreadsheets for analysis. Manual wargames were used, and modified as needed. Of the two computer wargames available, JTLS was only used to generate tactical deployment on the computer screens. These screens were then turned into slides and overlays for the many briefings that had to be given. Briefing were very important, the best wargaming in the world is worth little if you can't present the results quickly and clearly to the commanders who have to make decisions.
While a complete wargame operation was in Saudi Arabia, there was another one (the original equipment and troops not sent to the Gulf) back at CENTCOM headquarters in Florida. The two wargame operations had access to the same data and wargames. Data was transferred quickly through a satellite link between Florida and the Gulf.
As this was the first time US wargames went to war for all services, there were some problems. A major problem was keeping TACWAR up to date, as the game was still a pretty large piece of computer programming. While commercial wargames spend a lot of time making their products "bullet proof" (unlikely to fail when operating), military computer wargames assume there will always be programmers around to tinker with the program as needed. TACWAR had programmers available for on the spot enhancements and bug fixes. But the programmers did not have a security clearances high enough to allow them to work on TACWAR while it was loaded with the latest data about coalition troops in the Gulf (much less future plans). So when the programmers had to work on the system, a different (unclassified) set of data had to be loaded. The security problems went beyond programmer access. There was very tight security in Saudi Arabia concerning planning data. In addition to the usual keeping things locked up, troops were only allowed to know secret data that was required for their particular job. For the wargamers, this was a constant problem as they had to know everything in order to wargame out all the options the senior commanders were playing. As this was the American first war where wargaming was an integral and ongoing part of the command process, most of the people involved were not accustomed to sharing everything they had with a bunch of relatively low rank (mostly Majors) people mumbling something about games. Several times, it required the intervention of the CINC (commander in chief of CENTCOM, General Schwarzkopf) to get the data flowing to the wargamers. This tight security caused problems for other groups also, but none were as hassled by it as the wargamers. The wargamers had to know everything in order to wargame out what hadn't happened yet.
General Schwarzkopf went through the Army War College a few years before I began to give my lectures there. However, he had gotten religion as far as how much a commander should use wargames. The CENTCOM wargames crew was nearly worked to death, with overnighters (working all night) common. When the CINCs staff dropped a request in their laps, they had from six to thirty-six hours to get an answer. The actual gaming didn't take that long, gathering the information from all the units involved did. There was no centralized reporting for what every unit in the area was doing, could be doing or planned on doing. Wargaming required much more information than anyone else in the commanders staffs and this was not fully appreciated until the commander began to rely on the wargamers to constantly check out his ever changing options. There were often several new scenarios to check out each week, in addition to updating the existing database of units and material (supplies) on hand. Granted, the wargame crew worked in an air conditioned bunker. But they were some of the hardest working troops over there. And during many Scud alerts, the air conditioning was turned off (to prevent poison gas from being drawn inside).
The Gulf wargamers were constantly called upon to give an update on expected casualties. Casualties were a hot political item back in Washington. The troops in the Gulf were also concerned about casualties, but they weren't worrying about elections. One of the first TACWAR wargames in August of 1990 set the then minuscule coalition forces against 23 Iraqi divisions trying to sweep down the Gulf coast towards the major Saudi ports and airports. This game showed 20,000-25,000 coalition casualties. But as the coalition forces poured into the Gulf, the casualty numbers coming out of TACWAR went down to about 2,000 by early February, 1991. The final estimate was higher than the actual losses, but then TACWAR was able to make the Iraqis fight back, Saddam couldn't.
As the first heavy wartime use of wargaming, a lot was learned about what had to be changed, improved and added. It's a long list.
The TACWAR crew was not the only wargaming involved in the Gulf war. Two months before Iraq invaded, CENTCOM conducted a large computer wargame postulating that Iran would invade Iraq and that the US would side with Iraq. What was notable about this wargame was that it used several different wargames and involved air, land and naval forces. In July of 1990, the US Air Force did a wargame of Iraq invading Saudi Arabia. Once the shooting began, the US Marine Corps conducted a series of six wargames (the first two manual, the others computer assisted) on possible future operations in the Gulf. A Strategic game was conducted in August, concentrating on getting forces to the Gulf. In October, there was a campaign game covering overall operations in Saudi Arabia and Kuwait. In November there was an operational level game concentrating on Marine forces. In December there was a breaching game, to work out how Iraqi fortifications could best be breached. Another campaign game was run in early February that predicted under 3,000 coalition casualties (on the assumption that most Iraqis would fight). In March there was a "War Termination" game, looking at what could happen after the cease fire. The results of all these games were added to what the TACWAR gang was coming up with and the results generally matched.
The US Air Force regularly ran simulations of their air operations, both before and during the air war. Back in the US, various agencies were also running manual and computerized wargames.
Most of the military wargamers had used commercial wargames and several stated publicly that they were influenced by them.
The Iraqis, it turned out, were also quite keen on wargames, all of them manual. Some were of the miniatures type, using detailed terrain models. Iraqi wargamers were willing and able, most Iraqi combat troops weren't.
As a footnote to all this, there was quite a lot of commercial wargaming activity on the Gulf war during the "waiting period" between the Iraqi invasion in August 1990 and the coalition counter offensive in January, 1991. In August of 1990, I was again editing Strategy & Tactics magazine. Some wargamers, aware of my past efforts in doing games on wars about to be fought, suggested that it was time to do it again. I didn't have the time to do it myself, but thought it was a neat idea and suggested that a friend of mine with wargaming experiece do it. Austin Bay was the fellow in question and he rose to the challenge. The design was complete in less than a month and appeared in print before the end of the year. The game, Arabian Nightmares, was right on target. It wasn't the only one. Mark Herman quickly came up with an "update kit" for his Gulf Strike game, and got ut into print by the end of the year and was also accurate in predicting the course of the war. Several other games also came out after the war, treating Desert Storm as another historical event to be wargamed.
Creating Wargames for the Troops
Table of Contents